NUPROL Power - 11.1v LiPo 600mAh 3S Mini-Deans [Rate 20C @ 12A] [Burst 40C @ 24A] - PDW

Airsoft Batteries, Airsoft Batteries 11.1V, Airsoft Shop

NUPROL Power – 11.1v LiPo 600mAh 3S Mini-Deans [Rate 20C @ 12A] [Burst 40C @ 24A] – PDW

Name: NUPROL Power - 11.1v LiPo 600mAh 3S Mini-Deans [Rate 20C @ 12A] [Burst 40C @ 24A] - PDW
Availability: InStock

Amazon.co.uk Price: £14.01 (as of 17/04/2025 13:35 PST- Details) & FREE Shipping.

You will be taken to Amazon to checkout.

STATS – LiPo | 11.1v | 600 mAh | 20C/40C @ 12A/24A (Cont/Burst) – Airsoft AEGs use the “Burst” flow rate to start the motor, and then the “Cont” flow rate to provide continuous discharge (check your owners manual to ensure the battery purchased meets the minimum flow rate (C) of your AEG) – this battery provides approximately 3 minutes of continuous discharge before running flat
LITHIUM POLYMER – LiPo batteries have an excellent size/weight to capacity ratio, allowing you to fire more shots with a smaller battery. LiPo batteries can be recharged at any charge level without damaging the overall capacity of the battery. LiPo batteries should not be “run-flat”, as this can damage the battery and effect overall charge ability. LiPo batteries MUST be charged with a LiPo Balance Charger. LiPo batteries should always be charge in a fire-retardant Safe-Charging-Bag
PDW – rear wired Airsoft Replicas with PDW buttstocks require very small batteries to fit within. Always check the dimensions of the battery vs the battery compartment to ensure compatability

Categories: Airsoft Batteries, Airsoft Batteries 11.1V, Airsoft Shop

Description

STATS – LiPo | 11.1v | 600 mAh | 20C/40C @ 12A/24A (Cont/Burst) – Airsoft AEGs use the “Burst” drift rate to start the motor, and then the “Cont” drift rate to provide continuous discharge (check your owners manual to verify the battery purchased meets the minimum drift rate (C) of your AEG) – this battery provides approximately 3 minutes of continuous discharge before running flat
LITHIUM POLYMER – LiPo batteries have a very good size/weight to capacity ratio, allowing you to fire more shots with a smaller battery. LiPo batteries can also be recharged at any charge level without damaging the overall capacity of the battery. LiPo batteries must not be “run-flat”, as this can damage the battery and effect overall charge ability. LiPo batteries MUST be charged with a LiPo Balance Charger. LiPo batteries must All the time be charge in a fire-retardant Protected-Charging-Bag
PDW – rear wired Airsoft Replicas with PDW buttstocks require very small batteries to fit within. All the time check the dimensions of the battery vs the battery compartment to verify compatability
DEANS (T) – this battery is suitable for Airsoft Replicas the usage of a Deans (T) battery connector
QUALITY CONTROL – NP Power batteries are produced at an ISO 9000 Quality Keep watch over accredited manufacturing plant and shipped at an optimal charge rate of ≥60% to give protection to against degradation when in transport/ storage